bestway sand filter pump manual

Bestway Sand Filter Pump Manual⁚ A Comprehensive Guide

This comprehensive guide provides a detailed overview of the Bestway Sand Filter Pump, covering its features, installation, operation, maintenance, troubleshooting, and support information. Whether you’re a seasoned pool owner or a first-time user, this manual will equip you with the knowledge and instructions needed to ensure optimal performance and longevity of your Bestway Sand Filter Pump.

Introduction

Welcome to the Bestway Sand Filter Pump Manual. This manual is your comprehensive guide to understanding, installing, operating, and maintaining your Bestway Sand Filter Pump. Whether you have a Flowclear 58515, 58516, 58400, 58516E, 58677E, 58383, 58367, 58497, or any other Bestway Sand Filter Pump model, this manual provides essential information for ensuring optimal performance and longevity. We’ll cover everything from safety instructions and component identification to installation procedures, operation guidelines, routine maintenance, and troubleshooting tips. This manual is designed to be your one-stop resource for all things related to your Bestway Sand Filter Pump, so read it carefully and refer to it whenever necessary.

Safety Instructions

Your safety is paramount when using the Bestway Sand Filter Pump. Please read and understand the following safety instructions carefully before installing, operating, or maintaining your pump. Always unplug the pump before performing any maintenance or repairs to prevent the risk of electric shock. Ensure the pump is placed on a solid and level surface to avoid tipping. Never operate the pump in areas where it may be exposed to rain or moisture. Do not use the pump with damaged or frayed cords. Keep the pump away from children and pets. Always supervise children when they are near the pump. Never use the pump for any purpose other than filtering pool water. If you experience any problems with the pump, immediately stop using it and contact Bestway customer service for assistance.

Sand Filter Components

The Bestway Sand Filter Pump consists of several key components that work together to effectively filter your pool water. These components include⁚

• Control Valve⁚ This valve allows you to switch between different filtration modes, such as filter, backwash, rinse, and drain.
• Filter Tank⁚ This tank houses the filter media, typically silica sand, which traps debris and impurities from the pool water.
• Pump⁚ This component draws water from the pool and pushes it through the filter tank.
• Pressure Gauge⁚ This gauge indicates the pressure within the filter tank, helping you determine when it’s time for backwashing.
• Air Release Valve⁚ This valve allows air trapped in the filter system to escape, improving performance.

Understanding the function of each component will aid in proper installation, operation, and maintenance of your Bestway Sand Filter Pump.

Sand Filter Installation

Installing your Bestway Sand Filter Pump is a straightforward process, but it’s crucial to follow the instructions carefully to ensure proper operation and prevent any potential issues. Before you begin, gather all the necessary components, including the filter pump, sand, hoses, and any required tools. Find a level and stable location for the filter pump, preferably close to your pool. The installation process typically involves the following steps⁚

• Prepare the Base⁚ Ensure that the base is solid, level, and capable of supporting the weight of the filter pump.
• Connect the Pump⁚ Connect the pump to the filter tank and the pool using the provided hoses, ensuring secure connections.
• Fill the Sand Filter⁚ Carefully fill the filter tank with the recommended type and quantity of sand, taking care not to overfill the tank.

4.1. Preparing the Base

The foundation for your Bestway Sand Filter Pump plays a critical role in its stability and performance. A properly prepared base ensures that the filter pump remains upright and level, preventing any potential strain or damage. The base should be strong enough to support the weight of the filter pump, which can vary depending on the model. To prepare the base, consider the following steps⁚

• Choose a Level and Stable Location⁚ Select a spot near your pool that is level and free from any potential obstructions.
• Build a Base⁚ If you are using a pre-existing base, ensure it is in good condition and can support the weight of the filter pump. If not, construct a new base using materials like wood or concrete, ensuring that it is sturdy and level.
• Secure the Base⁚ Once the base is built, make sure it is securely anchored to the ground to prevent movement or shifting.

4.2. Connecting the Pump

Connecting the Bestway Sand Filter Pump to your pool is a crucial step in the installation process. This connection ensures that water is efficiently circulated and filtered, maintaining the cleanliness and hygiene of your pool. Follow these steps to ensure a secure and proper connection⁚

• Locate the Pump Inlet⁚ The pump inlet is typically located at the bottom of the pump. This is where the water from your pool will enter the filter system.
• Connect the Inlet Hose⁚ Attach one end of the inlet hose to the pump inlet and the other end to the return line of your pool. Ensure the connection is tight and secure to prevent leaks.
• Locate the Outlet⁚ The pump outlet is usually located at the top of the pump. This is where the filtered water will be discharged back into your pool.
• Connect the Outlet Hose⁚ Attach one end of the outlet hose to the pump outlet and the other end to the pool’s main drain. Ensure the connection is secure and free of any obstructions.

4.3. Filling the Sand Filter

Filling the sand filter with the appropriate amount of filter sand is a crucial step in the installation process. This sand acts as a filter medium, trapping debris and impurities from your pool water. Here’s a step-by-step guide to filling the sand filter⁚

• Prepare the Sand⁚ Purchase the recommended type of sand for your filter, typically 20 silica sand with a grain size of 0.45-0.85 mm. Avoid using sand with limestone or clay content, as these can clog the filter.
• Open the Valve⁚ Ensure the control valve is set to the “Backwash” position. This allows water to flow through the filter in reverse, flushing out any debris that may have accumulated during the initial filling.
• Add Sand⁚ Gradually pour the filter sand into the sand filter tank, ensuring it is evenly distributed. Avoid overfilling the tank, as this can restrict water flow and reduce filter efficiency.
• Run the Pump⁚ Once the filter is filled with sand, start the pump and run it for a few minutes to ensure the sand is properly settled. This step also helps remove any air pockets that may have formed during the filling process.

Sand Filter Operation

Once your Bestway Sand Filter is installed and filled with sand, it’s ready to operate. The filter pump plays a vital role in maintaining clean and healthy pool water by circulating and filtering the water. Here’s a breakdown of the operational steps⁚

• Setting the Control Valve⁚ The control valve is a crucial component that determines the flow of water through the filter. For normal filtration, set the valve to the “Filter” position. This allows water to flow through the filter tank, where the sand traps debris. Other valve settings, like “Backwash,” “Rinse,” and “Drain,” are used for cleaning and maintenance purposes.
• Running the Pump⁚ Once the valve is set to “Filter,” turn on the pump. The pump will circulate the pool water through the filter, removing debris and impurities. The recommended run time for the pump depends on various factors, including the size of your pool, the amount of debris, and the desired level of water clarity. Refer to the specific instructions in your Bestway Sand Filter Pump manual for guidance on optimal run times.

5.1. Setting the Control Valve

The control valve is a multi-position lever located on the top of the sand filter. It directs the flow of water through the filter, allowing you to select the appropriate function for various tasks. Here’s a guide to the common control valve settings⁚

• Filter⁚ This is the primary setting for normal operation. When the valve is in this position, water flows through the filter tank, passing through the sand bed and trapping debris. This setting ensures clean and healthy water in your pool.
• Backwash⁚ The backwash function reverses the flow of water through the filter, effectively flushing out accumulated debris. This is a crucial maintenance step to prevent the sand bed from becoming clogged and reducing the filter’s efficiency.
• Rinse⁚ After backwashing, the rinse setting helps to remove any remaining debris and reset the sand bed for optimal filtration. This step ensures the sand bed is clean and ready for normal operation.
• Drain⁚ The drain setting allows you to completely drain the sand filter. This is useful for winterizing your pool or for performing thorough cleaning;

5.2. Backwashing and Rinsing

Backwashing and rinsing are crucial maintenance steps that ensure your sand filter operates efficiently and maintains clean pool water. Here’s how to perform these tasks⁚

1. Backwashing⁚
   • Set the control valve to the “Backwash” position. This reverses the flow of water, flushing out trapped debris from the sand bed.
   • Turn on the sand filter pump and let it run for 3-5 minutes, or until the water runs clear. This ensures the sand bed is thoroughly cleaned.
   • Turn off the sand filter pump and set the control valve to the “Rinse” position.
2. Rinsing⁚
   • Turn on the sand filter pump and let it run for 1 minute. This rinses away any remaining debris from the backwashing process.
   • Turn off the sand filter pump and set the control valve back to the “Filter” position.

You should backwash and rinse your sand filter regularly, typically every 1-2 weeks, depending on the usage and level of debris in your pool.

Sand Filter Maintenance

Regular maintenance is essential to keep your Bestway Sand Filter Pump in top condition and ensure it effectively cleans your pool water. Here’s a breakdown of key maintenance tasks⁚

1. Clean the filter⁚
   • Remove any debris that accumulates on the filter lid or around the pump housing.
   • Check the pressure gauge regularly. A significant pressure increase indicates a clogged filter that needs backwashing or cleaning.

   

2. Replace the sand⁚
   • Over time, the sand in your filter will become compacted and lose its effectiveness.
   • Replace the sand every 2-3 years or as needed, depending on usage and water quality.
   • Use only pool-grade filter sand, free of limestone or clay, as recommended by Bestway.

Following these maintenance tips will help your sand filter operate efficiently and extend its lifespan, ensuring your pool water stays clean and refreshing.

6.1. Cleaning the Filter

Keeping your Bestway sand filter clean is crucial for optimal performance and longevity. Here’s a step-by-step guide to cleaning your filter⁚

1. Check the pressure gauge⁚ A significant increase in pressure indicates a clogged filter that needs cleaning. Refer to your filter’s manual for the recommended pressure range.
2. Turn off the power⁚ Unplug the filter pump from the power source before proceeding with any cleaning or maintenance tasks.
3. Backwash the filter⁚ This process involves reversing the flow of water through the filter to remove trapped debris. Follow the instructions in your filter manual for the backwashing procedure.
4. Rinse the filter⁚ After backwashing, rinse the filter to remove any remaining debris. Again, consult your manual for the recommended rinsing procedure.
5. Inspect the filter⁚ Once the filter is clean, visually inspect it for any signs of damage or wear. If you notice any issues, contact Bestway support for assistance.

Regular cleaning of your sand filter will help maintain its effectiveness and ensure your pool water stays clean and sparkling.